For Vpn Do I Need Mac Address Of Workstation Or Router

Both routers are using subnet mask of 255.255.255.0Typically it is tied to a key connection device in your computer called the network. My home network uses a router with an IP of 192.168.1.1 and hands out IPs from 192.168.1.2-49. The VPN service is configured to hand out IPs of 192.168.2.150-170.

That address is for one of the Blizzard servers. Then, instruct your router to connect only with these computers and deny. To set up both routers correctly, the first thing you need to do is configure your primary router to enable VPN passthrough.You should get the MAC address of all computers on your home wireless network. While your setup will vary depending on your router model, the recommended apparatus for most models is two routers and an internet connection.

FIREWALL tab, consider changing the Firewall Level to Typical or Maximum to see what effect that has on your internet access. If neither one is true, I'd disable both.In the SECURITY. That is, unless you're a gamer and want to use UPNP instead of setting port forwarding rules manually, or if you happen to have a VOIP phone and need the SIP ALG setting enabled.

And, you can multiply that by a multitude of hackers around the world.Its a little perplexing that a hacker is able to reach the pc thru the firewall. So, despite swapping the modem, you might only see temporary relief assuming that the hacker is sweeping through the ASN ranges on a regular basis. So, for example here is Hurricane Electric's search page for Rogers Communications:A hacker would simply take those ASN ranges and sweep through those, looking for any unprotected ports. The problem here is that external hackers will probably sweep through a range of addresses and ports, probing for any port that can be used for items such as logging into modems, routers and anything connected to the internet. That will result in a different MAC address for the newly obtained modem, which results in a different WAN IP address. The question is, does those settings impede your access to the internet to the point where it becomes a pain?On that tab, the Ping from WAN setting should be set to Deny.On the VPN Pass-through tab, unless you're running a VPN of some type, all of the pass-through settings should be set to Disabled.The Windows Remote Access setting should also be set to disabled.What you can do, which would have some minimal effect is to swap the modem at the nearest Rogers store.

Not familiar with dd-wrt either. Be able to give you a quick answer on that one. That includes Merlins-Asuswrt for Asus routers and (Openwrt & dd-wrt) for a mixture of routers.Small Net Builder forum for Merlins Asuswrt:I'm not familiar with Openwrt so I'd have to have a look at it. That's a discussion in answer is some router that you can load third party firmware which can give you IP filtering capability. Run a scan for all service ports to see what turns up as been unprotected.In terms of protecting yourself from external hackers, you would need to use a router that provides the ability to block external IP addresses, either by country or by blacklist, and there are several blacklists around that can be used for Firewall purposes.

But, for now, I can say that the combination of the 86U, Merlins Asuswrt and the add-ons work very well for adblocking, IP address blocking and country blocking. Don't know if it might drop for Boxing Day sales:So, don't have time at the moment for a long answer, I'll return to this later today. Thats the lowest price that I've seen for this router. I mention this as Bestbuy has this router on sale at the moment for $199.99. That also requires a USB3 flash drive to hold the add-on files. Those systems will have blocking capability built in, its just a matter of loading the right blocking lists.I run an Asus RT-AC86U with Merlins Asuswrt loaded, which can then be used to load add-ons developed specifically for the purpose of Adblocking, IP Filtering and others.

That makes a considerable difference in VPN data rates, going from a typical 40 to 50 Mb/s without hardware support to 200 to 250 Mb/s with hardware support. If you use VPNs or plan to, you should be looking for hardware support for Intels AES-NI which is the instruction set that is used for the hardware processor for encryption / decryption. The 86U has a dual core 1.8 Ghz processor. It takes a little getting used to as you have to SSH into the router, which isn't hard to do using PuTTy.Openwrt might give you a wider choice of routers to choose, but keep in mind, if you're running the gig plan, you should be looking at a router with a minimum 1.4 Ghz processor, preferably 1.8 Ghz processor or faster.

For Vpn Do I Need Mac Address Of Workstation Or Router